As Devroux laid in bed, his head was full of thoughts of the days blacksmithing session with Bart. He couldn't stop running the play back, trying to remember the information as much as he could to make it a natural thought when he restarted the next day. At some point in this meditation the mink managed to fall asleep, waking only at the sound of the gong the next morning. At the sound of the gong his mind picked up wherever it had left off, instantly calling back the practice from yesterday and bringing Devroux fully awake almost instantly. His thoughts were filled with his work at the furnace even whilst he ate breakfast, barely hearing Bart's attempts at conversation throughout the meal.
However, Devroux snapped back to reality as soon as the meal was over. The end of breakfast signified the beginning of another day of blacksmithing. He already had a piece of steel to work with once they got into the shop and that made it all the more exciting. The normally broody-looking bat mink followed Bart out the door of the house yet was the first to reach the barn with an air of excitement buzzing around him. Now that they were in front of the barn and Bart had his apprentice's attention while he unlocked the door, he could finally speak knowing that his words would be heard.
"Today, you're going to be hammering the metal for real, but I'm going to request that you just make simple daggers. They're small, meaning that you have more metal and more attempts to craft something of quality. Okay?" The old man paused in his unlocking movements, waiting for the mink to nod in understanding before completely undoing the locks and unlatching the door so that it could slide open. However, rather than doing it for him, Bart simply stepped to the side and let Devroux have at it.
The metal had been left on the anvil after they had tested its ability to take a hit. It had survived a few hammer strikes, which meant that it was workable so long as Devroux heated it until it was glowing once more. Devroux made sure that the forge was lit properly before carrying his metal over and sticking it into the pit, applying small puffs of air to heat it faster and allow him to work with it sooner. As soon as it began to glow the proper color, he used the tongs to retrieve it from the flame and carry it back to the anvil where he began to work the steel with the hammer.
Devroux brought the hammer down with careful strikes, afraid that he might break it regardless, but the strikes remained hard enough to warp the glowing metal with each touch. When the metal's glow began to diminish and working the steel became tough, the process to reheat it began again. Rinsing and repeating, the metal block that Devroux started with slowly began to take the shape of a dagger... roughly. When it was all said and done, the piece of steel that Devroux had crafted took the shape of a knife but lacked any real finesse in the make. It looked similar to what Bart had requested he make, but it was by no means a success, prompting his blacksmithing teacher to speak up for the first time since they began that day.
"The process is a lot harder than it seems," he said, taking the now cooled knife from Devroux's hands. As he inspected the lump of metal, he continued,
"There are tools over there on the table. You need to be checking the width of the blade consistently so that it's uniform, unlike this." The old man glanced at the mink, making sure he was following along.
"When you understand at least that much, it just becomes about practicing. The amount of force you use to keep it uniform, shaping, then you file and sharpen the blade separately. But before that, I should probably inform you that there are other ways to get stronger steel. It's not something you need to practice now, given the circumstance, but you should be aware of it." Bart crossed the room to a wooden workbench against the wall; the same bench he had gestured to when he talked about the measurement tools. He set Devroux's attempt at a dagger down and picked up a piece of steel roughly the same size, carrying it back to where the mink sat and handing it to him.
"When you want a better-quality steel, after you've already reduced it and oxidized it in a furnace, you can begin to fold it. This is done in the same way where you make the metal take shape, but before it actually becomes something. You simply draw the steel – elongate it with the hammer – then fold it and repeat the process over and over." Devroux inspected the piece of metal that Bart had given him while he talked. According to what the man said, it should be part of that process. There were obvious differences between the layers where they hadn't quite merged yet. Being told what to do and being shown something representing that process made the mink understand, though, as per what he was told, he wouldn't necessarily be putting that to use any time soon.
"This folding part, along with everything else involving the hammer, makes hammerscale." Bart gestured to the flakes that had fallen off while Devroux had been working his steel.
"It's made of little impurities that weren't released in the other processes. It makes it better. So, when you're constantly folding something, you're hammering out as many of those impurities as you can get." The mink nodded, slightly in a daze due to all the information that Bart had just given him. For the majority of the process, Bart had let Devroux make several attempts mostly unattended and hadn't given him actual instruction. Getting the information from him now was a stark difference, yet much appreciated. The old man wasn't the type to baby him, so he'd take all the information he could get and hold it tight.
"Now, from the top." Devroux's heart sank at the thought of starting the entire process over again, but it was the only way that he'd be able to walk away from Bart with his head held high. If he gave up now, before he had been able to make something that was at least somewhat successful and useable, he'd never be able to return to Drum with anything on his shoulders other than shame. It was barely something that he had to consider before getting back to work, starting from the absolute first step.
The mink shook his head, getting up from his seat and walking back to the corner where he could shovel more metal into the furnace. His fur hadn't changed, but the heat wasn't bothering him anymore. His conviction to the craft was far greater than the effect the heat was having on his body. Having practiced this part of the process all of yesterday and having mentally run through it many times over the course of the night and breakfast, Devroux was prepared for having to do it again. He waited patiently, applying heat steadily and air when necessary until it became the finished product of the workable steel. However, at Bart's recommendation, while the bars he created cooled off to the side, the mink worked at the furnace for a greater length of time in order to make several bars for him to use.
Working in front of the furnace for so long, regardless of his ability to handle the heat, slowly became unbearable, but the extra work and hardship now would be worth it when he didn't have to return to it later. When he had five bars to work with, he was able to leave the furnace and work with the drawing process once more.
Now that it was solidified, Devroux took the first portion of steel he had created and stuck it back into the forge. As he had practiced, he waited until it glowed before taking it to the anvil to draw and work with. The process was logical to start – hammer the elongate, turn and hammer from the other direction so that it didn't get too awkwardly out of shape. He continued this process, checking the metal with the measuring tools as it slowly began to take the shape of a knife. Bart had specified dimensions, and as soon as Devroux had met those specification, he stopped. That was the point when the blade became a success or failure, with this attempt marking yet another failure on the board.
The mink didn't lose heart though. He had several other attempts for the day to practice the process. He went back over, picked up the next piece in line, and stuck it in the forge until it glowed. Devroux would repeat this process several times throughout the day, failing each and every time. Two of the pieces of steel that Devroux had made hadn't even survived the first whack with the hammer, forcing him to return to the furnace in spite of his extra preparations to avoid it. He had only managed to get a total of seven attempts at creating a dagger to Bart's specifications and while none of them had been successful, each attempt grew closer and closer to being a proper weapon.
Bart sat watching the entire time, making remarks when they were of utmost importance, but otherwise staying silent. The only time he forcefully intervened that day was when he finally told Devroux to call it quits. Night had fallen once more, but Bart made sure to stop his apprentice early enough that they could enjoy dinner before bed. It frustrated Devroux having to leave his project, as he would continue for days if given the option, but he obliged at the request of his generous benefactor.
Dropping the tools where they stood, the two locked up the barn and headed inside for the night.